Keeping your silicone fantasy toys clean extends their life, preserves sculpted detail, and keeps play safe. This step-by-step guide covers daily washing, full sterilization, storage, and how to clean internal channels on ejaculating or squirting toys.
- Wash with warm water and fragrance-free soap after every session.
- Sterilize with a 2–4 minute boil or a properly diluted bleach solution.
- Use water-based lube only — see lube compatibility guide.
- Fully dry before storage to prevent odor or residue buildup.
- Flush internal channels on fluid-play toys immediately after use.
Which cleaning methods are safe for platinum silicone?
Platinum silicone is non-porous, meaning microbes cannot penetrate beneath the surface. For most solo use, warm water and mild soap is sufficient. Sterilization is recommended after anal or oral play, sharing, or when you want maximum hygiene assurance.
If you're unsure about proper setup and safe use, review our ejaculating dildo safe use guide.
Boiling, bleach, or dishwasher — what works best?
Boiling (2–4 minutes): Safe for non-motorized, 100% silicone toys. Fully submerge, remove with tongs, and air-dry completely.
Bleach (10% solution, ~10 minutes): Effective when properly diluted. Rinse thoroughly afterward to prevent irritation or fading.
Dishwasher sanitize cycle: Top rack only. No detergent. Skip heated drying. Allow full air-dry.
Never boil or dishwash: tubing, pumps, bulbs, valves, or toys with motors.
Daily clean vs. sterilization
| Method | Best For | Limitations |
|---|---|---|
| Soap + warm water | Routine cleaning after use | Not full sterilization |
| Boiling | True sterilization without chemicals | Only for non-motorized silicone |
| Bleach solution | Deep sanitation | Requires precise dilution + rinsing |
| Dishwasher sanitize | Hands-off heat cleaning | No detergent; ensure complete drying |
How to clean ejaculating and squirting toy channels
Toys with reservoirs or tubing require additional care. Residual liquid left inside can cause odor or clogging.
- Empty immediately: Never store pre-filled.
- Flush with warm soapy water: Push through until clear.
- Flush again with clean water: Remove soap residue.
- Air-dry fully: Leave uncapped and expel trapped water.
- Store dry: Only pack away when fully dry internally and externally.
For full use instructions before cleaning, see how to use an ejaculating dildo safely.
Common cleaning mistakes
- Using harsh detergents or abrasive scrubbers.
- Storing toys touching each other.
- Leaving moisture trapped in textured grooves or channels.
- Using silicone-based lube without patch testing.
Best storage practices
- Air-dry completely before storage.
- Store each toy separately in a cloth pouch.
- Avoid sunlight, high heat, and pressure.
- Keep fluid-play components disconnected until dry.
Lube compatibility
Water-based lubes: Safest option for silicone toys.
Hybrid lubes: Patch-test first.
Silicone lubes: Generally avoid unless specifically tested on a small area.
For more detail, see our complete cum style lube guide.
Why trust this guide
Written by Emily Conway, Creative Director of Dragon Dildo®. Cleaning recommendations are validated against manufacturer specifications and real customer feedback.